16-channel Intelligent Power Control DIN Rail Module-Geffen Maxtrix Control System Manufactory CN

16-channel Intelligent Power Control DIN Rail Module
GF-PMG16

Geffen Intelligent Power Control DIN Rail Module (Model: GF-PMG16) features a DIN rail mounting design, equipped with 16-channel relay output control. Each circuit can independently control the on/off operation of lighting equipment with a power rating of up to 6600W. Each switching signal can be configured into three modes: forced shutdown, forced startup, and normal switching.

Detail
Specification

●Features 16-channel 16A relay control output function

●Provides real-time display of power supply, communication and load status

●Has multi-circuit sequential time-delay startup function to avoid grid impact caused by simultaneous startup

●Equipped with power-off memory function, restoring the pre-power-off output state when power is resumed

●Comes with manual switch control function for each channel, which requires long-press operation and has misoperation prevention

●Supports dry contact signal input corresponding to each channel

●Has local and remote programming and testing functions

●Supports online program refresh

●Adopts 485 communication to realize real-time control and reliable data communication between nodes

●Standard 35mm DIN rail mounting

●Supports one-key all-on and one-key all-off interfaces

●Manual IP setting or automatic acquisition via DHCP

●Supports connection via DNS domain name or IP address

System Performance

Processor (CPU): 32-bit ARM core

Operating Frequency: 72 MHz

Output Interface

16 channels with 3-pin 5.08 mm terminals (NO/COM/NC)

Attribute: Dry contact (voltage-free output)

Relay Specification: Supports 16A current

Control Methods: Network, switching value input interface, RS485